AUDIOLINE POWER PMR 40 Manual de usuario descargar pdf (Pagina 6)

A.W. Communication Systems Limited

TRip2 Manual, Version 1.5 Page 6 of 34 © AWCSL 2010

4. Technical Specification

4.1. Internet Protocol and Application Features

The TRip2 provides support for the following IP features to enable the unit’s operation:

 IP Internet Protocol, the base network protocol by using all higher-level protocols

 QOS Quality of Service for IP packets

 UDP User Datagram Protocol, an unacknowledged transport protocol

 TCP Transmission Control Protocol, an acknowledged transport protocol

 RTP Real-Time Transport Protocol, for the transmission of real-time audio data

 RTCP RTP Control Protocol, for the monitoring of RTP

 ICMP Internet Control Message Protocol, for network management and discovery

 SSH

Secure Shell, for terminal emulation to configure the TRip2

 FTP File Transfer Protocol, for retrieving TRip2 updates

 TFTP Trivial File Transfer Protocol, for retrieving TRip2 updates

 HTTP Hyper-Text Transfer Protocol, for retrieving TRip2 updates

The support for each protocol is discussed in each interface section it is used to support.

The SSH support in TRip2 is intended to replace the less secure TELNET protocol in the original TRip unit.

TELNET is still supported, but we recommend you use an SSH client (such as PuTTY, freely available at

http://www.chiark.greenend.org.uk/~sgtatham/putty/), especially on untrusted networks, such as the

Internet.

1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Sin comentarios

AUDIOLINE POWER PMR 40 Manual de usuario Pagina 6